CCG6-12-15DR
DC DC CONVERTER 15V 6W
- 製造商
- TDK-Lambda
- 產品分類
- DC/DC 轉換器
- 封裝
- 6-SMD Module
- 庫存
- 1,483 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | TDK-Lambda |
|---|---|
| 產品分類 | DC/DC 轉換器 |
| Applications | ITE (Commercial) |
| Approval Agency | IEC, UL, CSA, EN, CE, UKCA |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 200mA, 200mA |
| Efficiency | 88% |
| Features | Remote On/Off, OCP |
| Min Qty | 1 |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature | -40°C ~ 95°C (With Derating) |
| Package | Tray |
| Power (Watts) | 6 W |
| Product status | Active |
| Series | CCG1R5-10 (6W) |
| Size / Dimension | 0.75" L x 0.49" W x 0.46" H (19.0mm x 12.4mm x 11.8mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 18V |
| Voltage - Input (Min) | 4.5V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 15V |
| Voltage - Output 2 | -15V |
| 資料表 | 查看資料表PDF |
採購概覽
CCG6-12-15DR 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
CCG6-12-15DR 詳細描述
Product Overview
The TDK-Lambda CCG6-12-15DR is an isolated surface-mount DC-DC converter module for board-level power distribution. It accepts a 4.5V to 18V input and provides two 15V output rails, one positive and one negative, each rated for 200mA, for a total output power of 6W. The module includes 1.5kV isolation, remote on/off control with active-low enable, and overcurrent protection. Its 6-SMD package and 19.0mm x 12.4mm x 11.8mm footprint support compact commercial ITE power architectures.
Key Features
- Isolated module DC-DC converter with two outputs: +15V and -15V.
- Input voltage range: 4.5V to 18V.
- Output current: 200mA per output, total power 6W.
- 1.5kV isolation rating.
- Remote on/off control with active-low enable and overcurrent protection.
- Surface-mount 6-SMD module, 19.0mm x 12.4mm x 11.8mm.
- Operating temperature range: -40°C to 95°C with derating; efficiency 88%.
- Safety approvals include IEC, UL, CSA, EN, CE, and UKCA; standard 62368-1.
Applications
- Commercial information technology equipment boards requiring isolated split-rail power for analog front-end circuits.
- Data acquisition and instrumentation modules using +15V and -15V rails for sensors, op-amps, and signal conditioning.
- Embedded systems needing remote enable and overcurrent protection for a 6W isolated output stage.
- Board-level power subsystems in commercial electronic equipment where a 4.5V to 18V input is available.
Design & Procurement Notes
Designers should confirm that the available input source remains within 4.5V to 18V and that each output load does not exceed 200mA, because the module is specified for 6W total. The active-low enable requires a compatible control signal for remote on/off. Surface-mount 6-SMD packaging and 11.8mm height should be checked against board spacing and mechanical clearance. Since operation is specified to 95°C with derating, thermal design should consider ambient temperature and load conditions. The 1.5kV isolation and safety approvals are relevant for commercial ITE designs, but final system compliance remains the integrator's responsibility.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
