MIC2564A-1YTS
DUAL SERIAL PCMCIA CONTROLLER
- 產品分類
- 電壓穩壓器與電壓控制器
- 封裝
- 24-TSSOP (0.173", 4.40mm Width)
- 庫存
- 9,473 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Microchip Technology |
|---|---|
| 產品分類 | 電壓穩壓器與電壓控制器 |
| Current - Output (Max) | 120mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Features | Status Flag |
| Input Type | Non-Inverting |
| Interface | Serial |
| Min Qty | 188 |
| Mounting Type | Surface Mount |
| Number of Outputs | 4 |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package | Tube |
| Product status | Obsolete |
| Ratio - Input:Output | 3:04:00 AM |
| Rds On (Typ) | 1.3Ohm |
| Supplier Device Package | 24-TSSOP |
| Switch Type | PCMCIA Switch |
| Voltage - Load | 3.3V, 5V, 12V |
| Voltage - Supply (Vcc/Vdd) | 3.3V ~ 12V |
| 資料表 | 查看資料表PDF |
採購概覽
MIC2564A-1YTS 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
MIC2564A-1YTS 詳細描述
Product Overview
The Microchip Technology MIC2564A-1YTS is a PCMCIA switch/driver with a serial interface and four high-side N-channel outputs. It supports 3.3 V, 5 V, and 12 V load voltages from a 3.3 V to 12 V supply, provides 120 mA maximum output current, and uses a surface-mount 24-TSSOP package.
Key Features
- Serial interface with a 3:4 input-to-output ratio and four outputs.
- High-side N-channel output configuration and non-inverting inputs.
- 120 mA maximum output current with typical 1.3 ohm Rds On.
- Fixed current limiting, over-temperature protection, and status flag.
- Operating temperature range of -40°C to +85°C (TA).
Applications
- PCMCIA card power switching.
- Serial-controlled high-side load switching for 3.3 V, 5 V, and 12 V rails.
- Low-current peripheral power management with status feedback.
Design & Procurement Notes
For design use, drive the non-inverting serial inputs and monitor the status flag. Check load current against the 120 mA maximum and account for typical 1.3 ohm Rds On in voltage-drop and thermal calculations. Match the 3.3 V to 12 V supply and 3.3 V, 5 V, or 12 V load rails to the system architecture.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
