CY26114ZC

Product Overview

The CY26114ZC from Infineon Technologies is a surface-mount clock generator, fanout distribution, and multiplexer IC in a 16-TSSOP package. It accepts a crystal input and provides clock output through one circuit with a 1:4 input-to-output ratio. The device includes a PLL with bypass, operates from a 3V to 3.6V supply, and is specified for a maximum frequency of 100MHz. The package width is 0.173 inches, or 4.40mm, and the operating temperature range is 0°C to 70°C.

Key Features

• Clock generator, fanout distribution, and multiplexer functions are combined in a single circuit.
• Crystal input with clock output and a 1:4 input-to-output ratio.
• PLL with bypass is provided; divider function is available and multiplier is not.
• Maximum frequency is 100MHz, with non-differential input and output characteristics.
• Supply voltage range is 3V to 3.6V, and operating temperature range is 0°C to 70°C.
• Surface-mount 16-TSSOP package measures 0.173 inches, or 4.40mm, in width.

Applications

• Distributing one crystal-derived clock to four downstream timing domains on a single board.
• Generating clock signals for logic circuits that operate from a 3V to 3.6V supply.
• Providing selectable or distributed timing paths in surface-mount designs using a 16-TSSOP package.
• Supporting clock fanout in systems that require a maximum output frequency up to 100MHz.

Design & Procurement Notes

For board design, confirm that the crystal-based input, 1:4 clock ratio, and 100MHz maximum frequency match the timing architecture. The 3V to 3.6V supply range and 0°C to 70°C operating temperature should be checked against the system power rail and ambient environment. Because the input and output characteristics are non-differential and the device contains one circuit, verify that non-differential clock distribution is acceptable for the target board. The 16-TSSOP surface-mount package and 4.40mm width should be considered during layout and reflow planning. For procurement, compare these electrical and mechanical characteristics with the final schematic and bill of materials before design release.