V150A24C500BL

Product Overview

The V150A24C500BL from Vicor Corporation is an isolated module DC DC converter intended for board-mount power architectures. It accepts a 100 V to 200 V input and provides a single 24 V output at up to 20.83 A, supporting a rated 500 W output. The full-brick package is through-hole mounted and measures 4.60 in L x 2.20 in W x 0.62 in H (116.8 mm x 55.9 mm x 15.7 mm). The converter specifies 3 kV isolation, 88.5% efficiency, and operation from -20°C to 100°C. Overvoltage protection and undervoltage lockout are included as device features.

Key Features

• Isolated module DC DC converter with one output
• 100 V to 200 V input range
• 24 V output at up to 20.83 A
• 500 W output power
• 3 kV isolation
• 88.5% efficiency
• Overvoltage protection and undervoltage lockout
• Through-hole full-brick package
• 4.60 in L x 2.20 in W x 0.62 in H (116.8 mm x 55.9 mm x 15.7 mm)
• Operating temperature range of -20°C to 100°C

Applications

• Commercial information technology equipment requiring an isolated 24 V board-level supply
• Intermediate bus conversion from a 100 V to 200 V DC source to 24 V loads
• Commercial equipment using a 500 W 24 V rail supplied through a through-hole full-brick converter

Design & Procurement Notes

Design planning should confirm that the input DC bus remains within 100 V to 200 V and that the 24 V load does not exceed 20.83 A or 500 W. The 88.5% efficiency rating should be considered when evaluating thermal dissipation, especially near the 100°C upper operating temperature. The 4.60 in by 2.20 in by 0.62 in full-brick footprint and through-hole mounting require board area, hole placement, and mechanical support checks. The 3 kV isolation rating and ITE (Commercial) designation should be reviewed against system insulation and application requirements. Overvoltage protection and undervoltage lockout features should be incorporated into startup and fault-handling plans.