SN65HVD231QDRQ1
IC TRANSCEIVER HALF 1/1 8SOIC
- 產品分類
- 驅動器、接收器與收發器IC
- 封裝
- 8-SOIC (0.154", 3.90mm Width)
- 庫存
- 6,560 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Texas Instruments |
|---|---|
| 產品分類 | 驅動器、接收器與收發器IC |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 125°C |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Product status | Active |
| Supplier Device Package | 8-SOIC |
| Voltage - Supply | 3V ~ 3.6V |
| 資料表 | 查看資料表PDF |
採購概覽
SN65HVD231QDRQ1 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
SN65HVD231QDRQ1 詳細描述
Product Overview
The SN65HVD231QDRQ1 from Texas Instruments is a surface-mount CANbus transceiver for half-duplex serial communication in systems using a 3 V to 3.6 V supply. The device integrates one driver and one receiver and supports a 1 Mbps data rate. Its specified operating range covers -40°C to 125°C, and the device uses an 8-SOIC package with a 3.90 mm body width. The transceiver is characterized as automotive grade and carries AEC-Q100 qualification, supporting CAN interfaces in automotive and embedded control environments where these specifications are required.
Key Features
- Texas Instruments SN65HVD231QDRQ1 is a CANbus transceiver with a 1/1 driver and receiver configuration.
- Half-duplex operation supports bidirectional communication on a CAN bus.
- The specified data rate is 1 Mbps.
- The supply voltage range is 3 V to 3.6 V.
- Receiver hysteresis is 100 mV.
- The operating temperature range is -40°C to 125°C.
- Automotive grade and AEC-Q100 qualification are specified.
- The package is a surface-mount 8-SOIC with 3.90 mm width.
Applications
- Automotive electronic control modules that use a CANbus interface.
- Embedded control boards requiring half-duplex CAN communication at 1 Mbps.
- Equipment or facility control networks that use CANbus as the serial link.
- Wide-temperature CAN nodes operating between -40°C and 125°C.
Design & Procurement Notes
Designers should confirm that the system supply remains within the specified 3 V to 3.6 V range and that the CAN bus architecture matches half-duplex, 1/1 transceiver operation. The 100 mV receiver hysteresis can be factored into bus signal-quality assessments, while the 1 Mbps data-rate limit should be checked against required network throughput. The -40°C to 125°C operating range supports wide-temperature board environments, and the automotive grade with AEC-Q100 qualification is relevant when automotive qualification requirements are part of the system specification. The 8-SOIC surface-mount package should be considered during PCB footprint, routing, and assembly planning.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
