RP10-2405SA/XC-HC

Product Overview

The Recom Power RP10-2405SA/XC-HC is an isolated module DC/DC converter for board-mount power conversion. It accepts an 18V to 36V input and provides a single 5V output rated for up to 2A, with a 10W power capability. The module uses a through-hole 6-DIP package with five leads and measures 1.00 in L x 1.00 in W x 0.65 in H. It includes a 1.6 kV isolation rating, 86% efficiency, and protection features including over-current, over-voltage, short-circuit, and undervoltage lockout, along with remote on/off control. The specified operating temperature range is -40°C to 80°C.

Key Features

• Single 5V isolated output with up to 2A current and 10W rated power.
• Input voltage range of 18V to 36V for board-mount DC/DC conversion.
• Through-hole 6-DIP module, 5 leads, with 1.00 in L x 1.00 in W x 0.65 in H dimensions.
• 1.6 kV isolation rating and 86% efficiency.
• Remote on/off control plus OCP, OVP, SCP, and UVLO protection features.
• Operating temperature range of -40°C to 80°C.

Applications

• Commercial information technology equipment requiring an isolated 5V board supply from an 18V to 36V input.
• Embedded systems needing a single 5V isolated output with remote on/off control.

Design & Procurement Notes

When integrating the RP10-2405SA/XC-HC, designers should verify that the system input remains within 18V to 36V and that total load current does not exceed 2A at 5V. The 1.6 kV isolation rating should be checked against the required input-to-output isolation voltage. The through-hole 6-DIP module, five leads, and 25.4mm x 25.4mm x 16.5mm envelope should be incorporated into board layout and mechanical clearance planning. Remote on/off, OCP, OVP, SCP, and UVLO features can be used in system power sequencing and fault management, while the 86% efficiency and -40°C to 80°C operating range should be considered for thermal design.