MPF7100BVMA2ESR2
POWER MANAGEMENT IC, I.MX 8XL WI
- 製造商
- NXP USA Inc.
- 產品分類
- 專用電源管理IC（PMIC）
- 封裝
- 48-VFQFN Exposed Pad
- 庫存
- 1,454 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | NXP USA Inc. |
|---|---|
| 產品分類 | 專用電源管理IC（PMIC） |
| Applications | i.MX Processors |
| Current - Supply | 10µA |
| Grade | Automotive |
| Min Qty | 4000 |
| Mounting Type | Surface Mount, Wettable Flank |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Package | Tape & Reel (TR) |
| Product status | Active |
| Qualification | AEC-Q100 |
| Supplier Device Package | 48-HVQFN (7x7) |
| Voltage - Supply | 2.5V ~ 5.5V |
| 資料表 | 查看資料表PDF |
採購概覽
MPF7100BVMA2ESR2 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
MPF7100BVMA2ESR2 詳細描述
Product Overview
The MPF7100BVMA2ESR2 from NXP USA Inc. is a power management IC intended for i.MX processor platforms, including i.MX 8XL and IMX8 designs. It combines five buck regulators and two LDOs to generate multiple supply rails from a 2.5 V to 5.5 V input. The device is specified for surface-mount wettable-flank assembly in a 48-VFQFN exposed-pad package, with a 48-HVQFN (7x7) package designation. Its automotive grade and AEC-Q100 qualification support automotive embedded applications, while the -40°C to 125°C (TA) operating range and 10 µA supply current are relevant to extended-temperature and low-current system designs.
Key Features
- Integrates five buck regulators and two LDOs for i.MX processor power rails.
- Accepts a supply voltage from 2.5 V to 5.5 V.
- Specifies a supply current of 10 µA.
- Rated for operation from -40°C to 125°C (TA).
- Carries automotive grade classification and AEC-Q100 qualification.
- Uses a 48-VFQFN exposed-pad package, identified as 48-HVQFN (7x7), with surface-mount wettable-flank mounting.
Applications
- Embedded systems based on i.MX processors, including i.MX 8XL and IMX8 platforms.
- Automotive electronic modules requiring an AEC-Q100 qualified power management IC.
- Industrial control platforms using i.MX processors in extended-temperature environments.
Design & Procurement Notes
When selecting MPF7100BVMA2ESR2, confirm that the target board uses an i.MX processor architecture compatible with this power management IC and that the available supply falls within 2.5 V to 5.5 V. The 48-VFQFN exposed pad and wettable-flank surface-mount format require attention to pad layout, soldering, and thermal dissipation, especially in 7x7 package designs. The five buck and two LDO outputs should be mapped against the processor rail requirements before schematic capture. For automotive designs, AEC-Q100 qualification and automotive grade status are relevant, while the -40°C to 125°C (TA) range supports extended-temperature operation. The 10 µA supply current should be considered in low-current supply calculations and power budget planning.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
