LD6806F/25P,115
IC REG LINEAR 2.5V 200MA 6XSON
- 製造商
- NXP USA Inc.
- 產品分類
- 電壓穩壓器與電壓控制器
- 封裝
- 6-XFDFN
- 庫存
- 15,000 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | NXP USA Inc. |
|---|---|
| 產品分類 | 電壓穩壓器與電壓控制器 |
| Control Features | Enable |
| Current - Output | 200mA |
| Current - Quiescent (Iq) | 100 µA |
| Current - Supply (Max) | 250 µA |
| Min Qty | 2219 |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature | -40°C ~ 85°C |
| Output Configuration | Positive |
| Output Type | Fixed |
| Package | Bulk |
| Product status | Obsolete |
| Protection Features | Over Current, Over Temperature |
| PSRR | 55dB (1kHz) |
| Supplier Device Package | 6-XSON, SOT886 (1.45x1) |
| Voltage - Input (Max) | 5.5V |
| Voltage - Output (Min/Fixed) | 2.5V |
| Voltage Dropout (Max) | 0.13V @ 200mA |
| 資料表 | 查看資料表PDF |
採購概覽
LD6806F/25P,115 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
LD6806F/25P,115 詳細描述
Product Overview
The NXP USA Inc. LD6806F/25P,115 is a fixed-output linear voltage regulator for surface-mount power management in compact electronic assemblies. The device provides a positive 2.5 V regulated output from an input voltage up to 5.5 V, with a rated output current of 200 mA. It is packaged in a 6-XFDFN, 6-XSON, SOT886 (1.45x1) case and includes an enable control function for output on/off management.
Key Features
- Fixed positive 2.5 V output with one regulator channel.
- 200 mA maximum output current.
- Maximum input voltage of 5.5 V.
- Dropout voltage of 0.13 V at 200 mA.
- Quiescent current of 100 µA and maximum supply current of 250 µA.
- Power-supply rejection ratio of 55 dB at 1 kHz.
- Enable control feature for output on/off management.
- Over-current and over-temperature protection.
- Operating temperature range of -40°C to 85°C.
- Surface-mount 6-XFDFN package, identified as 6-XSON, SOT886 (1.45x1).
Applications
- Regulated 2.5 V supply for small digital logic or sensor circuits within compact embedded boards.
- Local post-regulation from an input rail within the 5.5 V maximum to create a fixed 2.5 V supply for low-current subsystems.
- Enable-controlled power sequencing in compact general electronic assemblies.
- Board-level linear regulation where a 1.45 mm x 1 mm surface-mount footprint is beneficial.
Design & Procurement Notes
When selecting the LD6806F/25P,115, confirm that the available input voltage remains within the 5.5 V maximum and that the load requires a fixed 2.5 V output rather than an adjustable voltage. The 200 mA output current and 0.13 V dropout at 200 mA make it appropriate for low-current loads where headroom above the dropout threshold is planned. The enable control feature should be tied or controlled according to the required startup behavior, and the 55 dB PSRR at 1 kHz may be considered in designs where input ripple rejection is relevant. The quiescent current of 100 µA and maximum supply current of 250 µA are useful figures for low-power standby or always-on sections. The 6-XFDFN, 6-XSON, SOT886 package is suitable for compact surface-mount layouts, while the -40°C to 85°C operating range and over-temperature protection should be evaluated against the final board thermal environment.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
