TT1-6-X65+
1:1 XFMR, 0.004 - 300 MHZ, 50
- 製造商
- Mini-Circuits
- 產品分類
- 射頻巴倫（平衡/不平衡轉換器）
- 封裝
- 6-DIP (0.300", 7.62mm)
- 庫存
- 14 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Mini-Circuits |
|---|---|
| 產品分類 | 射頻巴倫（平衡/不平衡轉換器） |
| Frequency Range | 4kHz ~ 300MHz |
| Impedance - Unbalanced/Balanced | 1:1 |
| ion Loss (Max) | 3.0dB |
| Min Qty | 1 |
| Mounting Type | Through Hole |
| Package | Tube |
| Product status | Active |
| 資料表 | 查看資料表PDF |
採購概覽
TT1-6-X65+ 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
TT1-6-X65+ 詳細描述
Product Overview
TT1-6-X65+ is a Mini-Circuits plug-in 1:1 core-and-wire RF balun transformer specified for 4 kHz to 300 MHz. This through-hole version offers broadband unity-ratio isolation and balanced conversion over the same 4 kHz to 300 MHz range as the SMD variants.
The broad response supports HF/VHF equipment, balanced antennas and laboratory fixtures that retain a plug-in component architecture. Its X65 six-pin DIP form is not mechanically interchangeable with KK81 or flat-pack models, despite sharing the same electrical family.
Key Features
- Manufacturer: Mini-Circuits
- Part Number: TT1-6-X65+
- Product Category: RF Balun / RF Transformer
- Device Type: plug-in 1:1 core-and-wire RF balun transformer
- Frequency Range: 4 kHz to 300 MHz
- System / Port Impedance: 50 Ω unbalanced / 50 Ω balanced
- Impedance Ratio: 1:1
- Insertion Loss: 3.0 dB maximum
- RF Power: 0.25 W
- DC Current: 30 mA
- Package / Case: 6-DIP, 0.300 in / X65 plug-in
- Mounting Type: Through-hole
- Operating Temperature: -20°C to +85°C
Applications
- Legacy through-hole RF and IF assemblies
- Balanced antenna and push-pull amplifier coupling
- Laboratory and serviceable broadband transformer modules
Quality & Sourcing
Antrex Electronics can support sourcing of TT1-6-X65+ for production, repair and shortage requirements. Incoming inspection should compare the exact ordering code, operating band, impedance relationship, package or connector configuration and any center-tap or suffix-specific mechanical details. Parts from the same transformer family may not be interchangeable when the ratio, port impedance, lead style or installed geometry changes.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
