MAPD-010274-C209C0

Product Overview

MAPD-010274-C209C0 from MACOM Technology Solutions is a 2-way 0° RF power divider. This part is used for RF signal distribution, combining, quadrature splitting or front-end signal routing where frequency range, insertion loss, isolation and port matching directly affect system performance.

The ordering code should be matched for impedance, connector or package style, RoHS/reel option and mechanical footprint before replacement or BOM sourcing.

Key Features

• Manufacturer: MACOM Technology Solutions
• Part Number: MAPD-010274-C209C0
• Device Type: 2-way 0° RF power divider
• Configuration / Number of Ways: 2-way 0° equal divider / combiner
• Frequency Range: 5 MHz to 1218 MHz
• System Impedance: 75 Ω CATV-style or 50 Ω variant depending on suffix; confirm datasheet
• Insertion Loss: insertion loss specified in the exact MACOM datasheet; not repeated without full frequency table
• Isolation: output isolation specified in the exact MACOM datasheet; verify final limit by frequency
• VSWR / Return Loss: matched RF ports; confirm input/output return loss from full datasheet
• Amplitude Balance: amplitude balance specified in MACOM divider data
• Phase Balance: phase balance specified in MACOM divider data
• Power Handling: RF input power per the exact MACOM orderable datasheet
• Connector / Package / Case: surface-mount or pin/lead package defined by MACOM ordering code
• Operating Temperature: -40°C to +85°C class unless the exact datasheet states otherwise
• Design Notes: Use controlled-impedance RF traces and the vendor land pattern or connector-launch geometry for the selected ordering suffix.

Applications

RF receiver front ends, distribution amplifiers, test fixtures, communications equipment and signal monitoring paths.

Two-port fan-out or combining applications where matched impedance, isolation and repeatable insertion loss are important.

Quality & Sourcing

Antrex Electronics can support sourcing for MAPD-010274-C209C0 through available stock checks, BOM consolidation and alternative-lot review. For RF dividers and splitters, package condition, connector condition, date code, MSL handling and original labeling should be checked before shipment.

For project builds, repair support or shortage coverage, Antrex Electronics can coordinate visual inspection, package verification and third-party electrical or authenticity testing when required. This helps buyers manage risk when sourcing discontinued, legacy or hard-to-find RF power divider and splitter parts.