CY9BF124KPMC-G-MNE2
IC MCU 32BIT 288KB FLASH 48LQFP
- 產品分類
- 微控制器 - MCU
- 封裝
- 48-LQFP
- 庫存
- 2,500 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Infineon Technologies |
|---|---|
| 產品分類 | 微控制器 - MCU |
| Connectivity | CSIO, I2C, LINbus, UART/USART |
| Core Processor | ARM® Cortex®-M3 |
| Core Size | 32-Bit Single-Core |
| Data Converters | A/D 14x12b; D/A 2x10b |
| Mounting Type | Surface Mount |
| Number of I/O | 35 |
| Operating Temperature | -40°C ~ 105°C (TA) |
| Oscillator Type | Internal |
| Package | Tray |
| Peripherals | DMA, LVD, POR, PWM, WDT |
| Product status | Active |
| Program Memory Size | 288KB (288K x 8) |
| Program Memory Type | Flash |
| RAM Size | 32K x 8 |
| Series | FM3 MB9B120M |
| Speed | 72MHz |
| Supplier Device Package | 48-LQFP (7x7) |
| Voltage - Supply (Vcc/Vdd) | 2.7V ~ 5.5V |
| 資料表 | 查看資料表PDF |
採購概覽
CY9BF124KPMC-G-MNE2 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
CY9BF124KPMC-G-MNE2 詳細描述
Product Overview
The CY9BF124KPMC-G-MNE2 from Infineon Technologies is a 32-bit microcontroller in the FM3 MB9B120M series, built around an ARM Cortex-M3 core with a 72MHz speed. It provides 288KB (288K x 8) FLASH program memory, 32K x 8 RAM, 35 I/O, and connectivity for CSIO, I2C, LINbus, and UART/USART. The device uses a 48-LQFP (7x7) surface-mount package and operates from 2.7V to 5.5V over a temperature range of -40°C to 105°C (TA).
Key Features
- ARM Cortex-M3 32-bit core with 72MHz speed.
- 288KB (288K x 8) FLASH program memory and 32K x 8 RAM.
- 35 I/O with connectivity for CSIO, I2C, LINbus, and UART/USART.
- Peripherals include DMA, LVD, POR, PWM, and WDT.
- A/D 14x12b and D/A 2x10b converter resources with internal oscillator.
- 2.7V to 5.5V supply, -40°C to 105°C (TA), 48-LQFP (7x7) surface-mount package.
Applications
- Embedded control units requiring a 32-bit core, FLASH program memory, and multiple serial interfaces.
- Sensor measurement and signal-conditioning subsystems using integrated A/D and D/A converter resources.
- PWM-based control output stages using DMA and WDT support.
- Communication nodes using LINbus, UART/USART, I2C, or CSIO interfaces.
Design & Procurement Notes
When evaluating the part, match the 48-LQFP (7x7) footprint to the PCB assembly process and verify that the 2.7V to 5.5V supply range is compatible with the system rail. The -40°C to 105°C (TA) range should be checked against ambient conditions. Designers should map the 35 I/O and protocol set to required board signals, and confirm that 288KB FLASH and 32K x 8 RAM are sufficient for firmware and runtime data. Verify that the A/D 14x12b and D/A 2x10b resources meet the required analog signal count and resolution.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
