MAX2655EXT+T
IC AMP GPS 1.4GHZ-1.7GHZ SC70-6
- 製造商
- Maxim Integrated
- 產品分類
- RF 放大器
- 封裝
- 6-TSSOP, SC-88, SOT-363
- 庫存
- 603 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Maxim Integrated |
|---|---|
| 產品分類 | RF 放大器 |
| Current - Supply | 8.3mA |
| Frequency | 1.4GHz ~ 1.7GHz |
| Gain | 14.1dB |
| Min Qty | 1 |
| Mounting Type | Surface Mount |
| Noise Figure | 1.45dB |
| P1dB | -12.1dBm |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Product status | Active |
| RF Type | GPS, PCS, DCS, WLL |
| Supplier Device Package | SC-70-6 |
| Test Frequency | 1.575GHz |
| Voltage - Supply | 2.7V ~ 5.5V |
| 資料表 | 查看資料表PDF |
採購概覽
MAX2655EXT+T 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
MAX2655EXT+T 詳細描述
Product Overview
MAX2655EXT+T is a Maxim low-noise amplifier / RF front-end amplifier from Analog Devices / Maxim Integrated. In an RF design it is normally used as a low-noise receiver front-end gain stage, so the useful sourcing checks are not only the ordering code but also the operating band, gain behavior, output level, package footprint and bias conditions.
For this model, the key application data to verify are: application-specific RF band such as GPS/GNSS, cellular or ISM; exact band follows the MAX26xx base; noise figure, gain and linearity are specified by the exact Maxim base part; and low-voltage RF IC bias, package suffix +T normally indicates tape-and-reel. Because RF amplifier parts are layout- and matching-sensitive, MAX2655EXT+T should be treated as an exact-BOM item unless the replacement has been validated with the same matching network, thermal design and control conditions.
Key Features
- Manufacturer: Analog Devices / Maxim Integrated
- Part Number: MAX2655EXT+T
- Device Type: Maxim low-noise amplifier / RF front-end amplifier
- Signal-Chain Role: low-noise receiver front-end gain stage
- Frequency / Band: application-specific RF band such as GPS/GNSS, cellular or ISM; exact band follows the MAX26xx base
- Gain / NF / Linearity: noise figure, gain and linearity are specified by the exact Maxim base part
- Output Power / Compression: low-power LNA output level, not a high-power PA
- Supply / Bias: low-voltage RF IC bias, package suffix +T normally indicates tape-and-reel
- RF Interface: RF input/output plus enable/bias pins; many parts include matching elements
- Package / Mounting: surface-mount RF IC, MMIC, transistor or connectorized module depending on base number
- Design Note: verify S-parameters, matching network, thermal pad/flange and control pins before substituting this RF amplifier
Applications
- GNSS receiver front ends
- cellular/ISM RF modules
- portable wireless equipment
- legacy receiver board repair
Quality & Sourcing
Antrex Electronics can support sourcing for MAX2655EXT+T and related RF amplifier BOM lines, including exact part-number matching, lot-label review, packaging inspection and third-party testing support when the project requires additional verification.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
