LT3083EDF#PBF
IC REG LINEAR POS ADJ 3A 12DFN
- 產品分類
- 電壓穩壓器與電壓控制器
- 封裝
- 12-WFDFN Exposed Pad
- 庫存
- 13,231 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Analog Devices Inc. |
|---|---|
| 產品分類 | 電壓穩壓器與電壓控制器 |
| Current - Output | 3A |
| Current - Quiescent (Iq) | 50.5 µA |
| Current - Supply (Max) | 1 mA |
| Min Qty | 1 |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature | -40°C ~ 125°C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package | Tube |
| Product status | Active |
| Protection Features | Over Current, Over Temperature, Short Circuit |
| PSRR | 85dB ~ 20dB (120Hz ~ 1MHz) |
| Supplier Device Package | 12-DFN (4x4) |
| Voltage - Input (Max) | 14V |
| Voltage - Output (Max) | 14V |
| Voltage - Output (Min/Fixed) | 0V |
| Voltage Dropout (Max) | 0.42V @ 3A |
| 資料表 | 查看資料表PDF |
採購概覽
LT3083EDF#PBF 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
LT3083EDF#PBF 詳細描述
Product Overview
The LT3083EDF#PBF from Analog Devices Inc. is a positive, adjustable-output linear voltage regulator for single-rail power management. It can deliver up to 3A from an input voltage up to 14V, with an output range specified from 0V to 14V. The device is supplied in a 12-DFN (4x4) surface-mount package with an exposed pad, supporting compact board layouts. Its 50.5 µA quiescent current and 1 mA maximum supply current make it suitable for designs that need low idle consumption while maintaining a regulated positive output.
Key Features
- Positive adjustable output with one regulator section and a 3A output current capability.
- Input voltage range up to 14V, with output voltage adjustable from 0V to 14V.
- Maximum dropout voltage of 0.42V at 3A allows regulation with a small input-to-output voltage difference.
- Low quiescent current of 50.5 µA and maximum supply current of 1 mA reduce idle power draw.
- PSRR from 85dB at 120Hz to 20dB at 1MHz helps attenuate input supply noise.
- Integrated over-current, over-temperature, and short-circuit protection are included.
- 12-WFDFN exposed pad and 12-DFN (4x4) surface-mount package provide a compact footprint and thermal pad.
- Operating temperature range is -40°C to 125°C.
Applications
- Adjustable 3A power rails in embedded control boards and instrumentation.
- Low-quiescent standby or auxiliary supplies in portable and battery-powered equipment.
- Regulated positive rails for analog front ends where supply-noise attenuation is useful.
- Single-output regulator positions in compact power modules using surface-mount thermal pads.
Design & Procurement Notes
When selecting the LT3083EDF#PBF, verify that the available input rail remains at or below 14V and that the required output plus dropout margin leaves sufficient headroom at 3A. The exposed-pad 12-DFN package should be incorporated into the PCB thermal plan, especially near the upper end of the -40°C to 125°C operating range. The 0.42V dropout value at 3A is useful for tight input-output voltage differences, while the 50.5 µA quiescent current and 1 mA supply current support low-idle designs. PSRR varies with frequency, so input filtering should be evaluated against the actual noise spectrum of the upstream supply. Protection features are present, but final circuit protection, layout, and thermal calculations should still be performed at the system level.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
