HMC1132PM5E
IC RF AMP 32LFCSP
- 產品分類
- RF 放大器
- 封裝
- 32-LFQFN Exposed Pad, CSP
- 庫存
- 343 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Analog Devices Inc. |
|---|---|
| 產品分類 | RF 放大器 |
| Min Qty | 1 |
| Mounting Type | Surface Mount |
| Package | Strip |
| Product status | Active |
| Supplier Device Package | 32-LFCSP-CAV (5x5) |
| 資料表 | 查看資料表PDF |
採購概覽
HMC1132PM5E 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
HMC1132PM5E 詳細描述
Product Overview
HMC1132PM5E is a Hittite / Analog Devices microwave MMIC amplifier from Analog Devices. In an RF design it is normally used as a microwave gain, driver or power-amplifier stage, so the useful sourcing checks are not only the ordering code but also the operating band, gain behavior, output level, package footprint and bias conditions.
For this model, the key application data to verify are: GHz-band microwave coverage is exact-base specific; many HMC/ADPA parts are narrowband or broadband MMICs; gain, Psat/P1dB, OIP3 and NF must be matched to the exact HMC/ADPA base; and positive/negative gate or drain bias as specified by the MMIC family. Because RF amplifier parts are layout- and matching-sensitive, HMC1132PM5E should be treated as an exact-BOM item unless the replacement has been validated with the same matching network, thermal design and control conditions.
Key Features
- Manufacturer: Analog Devices
- Part Number: HMC1132PM5E
- Device Type: Hittite / Analog Devices microwave MMIC amplifier
- Signal-Chain Role: microwave gain, driver or power-amplifier stage
- Frequency / Band: GHz-band microwave coverage is exact-base specific; many HMC/ADPA parts are narrowband or broadband MMICs
- Gain / NF / Linearity: gain, Psat/P1dB, OIP3 and NF must be matched to the exact HMC/ADPA base
- Output Power / Compression: MMIC output power and thermal limit per ADI datasheet
- Supply / Bias: positive/negative gate or drain bias as specified by the MMIC family
- RF Interface: 50 Ω RF/microwave ports, sometimes die or ceramic SMT package
- Package / Mounting: surface-mount RF IC, MMIC, transistor or connectorized module depending on base number
- Design Note: verify S-parameters, matching network, thermal pad/flange and control pins before substituting this RF amplifier
Applications
- microwave radios
- radar and aerospace RF modules
- test instrumentation
- point-to-point links
Quality & Sourcing
Antrex Electronics can support sourcing for HMC1132PM5E and related RF amplifier BOM lines, including exact part-number matching, lot-label review, packaging inspection and third-party testing support when the project requires additional verification.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
