ADP160ACBZ-2.5-R7
IC REG LINEAR 2.5V 150MA 4WLCSP
- 產品分類
- 電壓穩壓器與電壓控制器
- 封裝
- 4-WFBGA, WLCSP
- 庫存
- 11,494 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Analog Devices Inc. |
|---|---|
| 產品分類 | 電壓穩壓器與電壓控制器 |
| Control Features | Enable |
| Current - Output | 150mA |
| Current - Quiescent (Iq) | 1.25 µA |
| Current - Supply (Max) | 65 µA |
| Min Qty | 1 |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature | -40°C ~ 125°C |
| Output Configuration | Positive |
| Output Type | Fixed |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Product status | Active |
| Protection Features | Over Current, Over Temperature, Under Voltage Lockout (UVLO) |
| PSRR | 65dB ~ 50dB (100Hz ~ 1kHz) |
| Supplier Device Package | 4-WLCSP (0.96x0.96) |
| Voltage - Input (Max) | 5.5V |
| Voltage - Output (Min/Fixed) | 2.5V |
| 資料表 | 查看資料表PDF |
採購概覽
ADP160ACBZ-2.5-R7 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
ADP160ACBZ-2.5-R7 詳細描述
Product Overview
The ADP160ACBZ-2.5-R7 from Analog Devices Inc. is a linear voltage regulator IC intended for positive fixed-output regulation. It provides a single 2.5 V output at up to 150 mA and accepts input voltages up to 5.5 V. The device uses a 4-WLCSP surface-mount package, with a package outline of 0.96 x 0.96, and includes enable control along with over-current, over-temperature, and under-voltage lockout protection. The quiescent current is 1.25 µA, supporting power-sensitive operation, while the PSRR of 65 dB at 100 Hz and 50 dB at 1 kHz describes line-noise rejection behavior over that range.
Key Features
- Single positive fixed output: 2.5 V at 150 mA.
- Maximum input voltage is 5.5 V for low-voltage linear regulation.
- Quiescent current is 1.25 µA, with maximum supply current of 65 µA.
- Enable control supports output enable or disable operation.
- Protection features include over-current, over-temperature, and under-voltage lockout (UVLO).
- PSRR is 65 dB at 100 Hz and 50 dB at 1 kHz.
- Operating temperature range is -40°C to 125°C.
- 4-WLCSP surface-mount package with 0.96 x 0.96 outline.
Applications
- Battery-powered portable electronics needing a compact 2.5 V rail for low-current logic or sensor circuits.
- Embedded control boards where a fixed positive output and enable control support power sequencing or subsystem power management.
- Instrumentation circuits requiring a small surface-mount linear regulator with over-current and over-temperature protection.
- Low-power measurement or communication modules that benefit from 1.25 µA quiescent current and 5.5 V maximum input.
Design & Procurement Notes
When selecting the ADP160ACBZ-2.5-R7, verify that the load current remains within 150 mA and that the input voltage does not exceed 5.5 V for the fixed 2.5 V output. The enable control should be connected according to the desired power-up behavior, and the over-current, over-temperature, and under-voltage lockout functions should be considered during fault analysis. Because the device uses a 4-WLCSP surface-mount package with a 0.96 x 0.96 outline, pad layout, solder paste volume, and inspection access should be planned for surface-mount assembly. The operating range of -40°C to 125°C should be checked against the actual board thermal environment, and the PSRR values at 100 Hz and 1 kHz should be used when evaluating noise-sensitive analog or digital rails.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
