BLM9D1822-30BZ
BLM9D1822-30B/SOT1462/REELDP
- 製造商
- Ampleon USA Inc.
- 產品分類
- RF 放大器
- 封裝
- 20-QFN Exposed Pad
- 庫存
- 965 件
- 供貨狀態
- 當前數量需確認。
產品屬性
| 製造商 | Ampleon USA Inc. |
|---|---|
| 產品分類 | RF 放大器 |
| Frequency | 1.8GHz ~ 2.2GHz |
| Gain | 29.3dB |
| Min Qty | 1 |
| Mounting Type | Surface Mount |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Product status | Active |
| Supplier Device Package | 20-PQFN (8x8) |
| Voltage - Supply | 28V |
| 資料表 | 查看資料表PDF |
採購概覽
BLM9D1822-30BZ 的主要供貨及採購資訊。
為何選擇 Antrex Electronics？
為已核實的採購、檢驗及國際採購需求提供獨立分銷支援。
獨立分銷支援
支援短缺、停產及難找電子元器件的生產與採購需求。
可追溯性審查
可在訂單確認前審查標籤、批號、生產批次及現有供應鏈文件。
檢驗與測試
如有需要，可安排外觀檢查、X-ray 及第三方測試支援。
全球採購支援
支援 OEM、EMS、分銷商的國際採購需求，涵蓋單一料號及 BOM 專案。
資質與驗證支援
為電子元器件採購提供品質控制、可追溯性審查及檢驗支援。
BLM9D1822-30BZ 詳細描述
Product Overview
BLM9D1822-30BZ is a LDMOS RF power transistor / RF power amplifier device from Ampleon. In an RF design it is normally used as a final or driver PA device in a matched RF power stage, so the useful sourcing checks are not only the ordering code but also the operating band, gain behavior, output level, package footprint and bias conditions.
The base number places this device in the 1800 MHz to 2200 MHz family (derived from the BLM 18/22 band code); the suffix identifies the ordering or packing variant. Output power and linearity must be evaluated with the manufacturer's reference circuit because the same LDMOS device can behave differently when drain bias, load impedance or heat spreading changes.
Key Features
- Manufacturer: Ampleon
- Part Number: BLM9D1822-30BZ
- Device Type: LDMOS RF power transistor / RF power amplifier device
- Signal-Chain Role: final or driver PA device in a matched RF power stage
- Frequency / Band: 1800 MHz to 2200 MHz family (derived from the BLM 18/22 band code)
- Gain / NF / Linearity: load-pull/reference-circuit gain and efficiency must be taken from the Ampleon datasheet, not estimated from package alone
- Output Power / Compression: 30 W class LDMOS power-amplifier family
- Supply / Bias: high-current LDMOS drain bias with thermal design requirement
- RF Interface: RF input/output through external impedance matching and heat spreading
- Package / Mounting: surface-mount RF IC, MMIC, transistor or connectorized module depending on base number
- Design Note: verify S-parameters, matching network, thermal pad/flange and control pins before substituting this RF amplifier
Applications
- cellular base-station power amplifiers
- broadcast/ISM RF power modules
- Doherty or linear PA designs
- legacy PA-board repair sourcing
Quality & Sourcing
Antrex Electronics can support sourcing for BLM9D1822-30BZ and related RF amplifier BOM lines, including exact part-number matching, lot-label review, packaging inspection and third-party testing support when the project requires additional verification.
探索更多採購選項
可按製造商、產品分類或採購需求繼續尋找合適料號。
