IC268G
The IC268G is the package marking code for the ICM-20608-G 6-axis motion tracking sensor from TDK InvenSense, integrating a 3-axis gyroscope and 3-axis accelerometer in a compact LGA package
- ПРОИЗВОДИТЕЛЬ
- TDK InvenSense
- КАТЕГОРИЯ ТОВАРА
- Гироскопы
- Корпус
- QFN
- Склад
- 1,500 шт.
- Наличие
- Текущее количество требует подтверждения.
Характеристики товара
| ПРОИЗВОДИТЕЛЬ | TDK InvenSense |
|---|---|
| КАТЕГОРИЯ ТОВАРА | Гироскопы |
| Accelerometer Full Scale Range | ±2g / ±4g / ±8g / ±16g |
| Accelerometer Noise Performance | High Accuracy Motion Sensing |
| Applications | Wearable Devices, IMU Systems, Drones, Robotics, Gaming Controllers, Motion Tracking Equipment |
| Built-in Temperature Sensor | Yes |
| Digital Motion Processing | Supported |
| Gyroscope Full Scale Range | ±250 / ±500 / ±1000 / ±2000 dps |
| Gyroscope Noise Performance | Low Noise MEMS Design |
| Integrated Sensors | 3-axis accelerometer + 3-axis gyroscope |
| Interface Type | I2C / SPI Digital Interface |
| Low Power Mode | Supported |
| Marking Code | IC268G |
| Operating Temperature Range | -40°C to +85°C |
| Package Size | 3 mm × 3 mm × 0.75 mm |
| Package Type | LGA-16 |
| Product Type | 6-Axis Motion Tracking Device |
| Resolution | 16-bit ADC Output |
| RoHS Compliance | Yes |
| Sensor Type | MEMS Accelerometer + MEMS Gyroscope |
| Supply Voltage | 1.71 V to 3.45 V |
| Техническая документация | Запросить даташит |
Сводка по закупке
Основная информация о поставке и закупке для IC268G.
Почему выбирают Antrex Electronics?
Независимая дистрибьюторская поддержка для проверенных закупок, инспекции и международных требований к поставкам.
Поддержка независимого дистрибьютора
Поиск дефицитных, снятых с производства и труднодоступных компонентов для производственных и закупочных задач.
Проверка прослеживаемости
До подтверждения заказа можно проверить этикетку, партию, дату производства и доступную документацию по цепочке поставок.
Инспекция и тестирование
При необходимости можно организовать визуальную проверку, рентген и тестирование третьей стороной.
Глобальная поддержка закупок
Поддержка международных закупок для OEM, EMS и дистрибьюторов — от отдельных компонентов до BOM-проектов.
Сертификация и поддержка проверки
Контроль качества, проверка прослеживаемости и инспекционная поддержка для закупок электронных компонентов.
Подробное описание IC268G
Product Overview
IC268G is the top marking code for the ICM-20608-G motion tracking device manufactured by InvenSense (now part of TDK). The ICM-20608-G is a 6-axis MEMS motion sensor integrating a 3-axis gyroscope and a 3-axis accelerometer in a compact package. Designed for motion sensing applications requiring high accuracy, low power consumption and fast response, the device is widely used in drones, robotics, wearable devices, image stabilization systems and industrial motion control equipment.
Key Features
Manufacturer: InvenSense / TDK InvenSense
Part Number: ICM-20608-G
Marking Code: IC268G
Device Type: 6-Axis MEMS Motion Tracking Device
Product Category: Inertial Measurement Unit (IMU)
Integrated Sensors: 3-Axis Gyroscope and 3-Axis Accelerometer
Gyroscope Range: ±250 / ±500 / ±1000 / ±2000°/s
Accelerometer Range: ±2g / ±4g / ±8g / ±16g
Interface Type: SPI and I²C Digital Interface
Supply Voltage: 1.71V to 3.45V
Digital Motion Processor (DMP): Integrated
High-Speed SPI Interface Support
Built-In Temperature Sensor
Programmable Low-Pass Filtering
Factory-Calibrated Sensor Parameters
Low Power Consumption Operation
High Shock Tolerance MEMS Structure
Motion Detection and Wake-On-Motion Functions Supported
Operating Temperature Range: -40°C to +85°C
Package Type: 16-Pin LGA
Package Size: 3mm × 3mm × 0.75mm
Mounting Type: Surface Mount Technology (SMD)
Application Type: Motion Sensing and Position Tracking
Typical Applications: Drones, Robotics, Wearable Devices, Gaming Controllers, Camera Stabilization Systems, Navigation Equipment and Industrial Motion Sensors
Product Status: Legacy / Industrial Maintenance Component
Ordering Note: Verify marking code, package type, firmware compatibility and sensor revision before production use.
Applications
IC268G (ICM-20608-G) is designed for motion tracking applications requiring combined acceleration and angular velocity measurement. Typical applications include FPV flight controllers, drones, robotics platforms, handheld controllers, wearable electronics, image stabilization modules, industrial sensors and navigation systems.
Quality & Sourcing
Antrex Electronics can support IC268G / ICM-20608-G sourcing with stock availability checks, RFQ quotation, manufacturer verification, package confirmation, date code review and shipment arrangement. For IMU sensor sourcing projects, buyers can provide quantity requirements, acceptable date codes, package specifications and application information for faster quotation support.
For quality control, Antrex Electronics can help arrange product photos, marking verification, visual inspection and third-party testing when required. OEMs, EMS providers, drone manufacturers, robotics companies, repair centers and electronic component buyers are welcome to send BOM lists or hard-to-find sensor component requests.
Datasheet
Другие варианты закупки
Продолжите поиск по производителю, категории продукции или требованиям к закупке.
