F1180NBGI8

Product Overview

F1180NBGI8 from Renesas Electronics Corporation is a dual path RF front-end and RF-to-IF mixer used for RF and microwave frequency conversion. This product detail focuses on practical mixer parameters such as RF/LO/IF range, conversion performance, linearity, drive requirements and package compatibility.

The device is suitable for receiver, transmitter, upconversion or downconversion stages where the exact suffix must be matched for package, tape-and-reel format, connector style, temperature grade and RF layout before purchase.

Key Features

• Manufacturer: Renesas Electronics Corporation
• Part Number: F1180NBGI8
• Device Type: dual path RF front-end and RF-to-IF mixer
• Mixer Configuration / Topology: dual RF amplifier, DSA, RF mixer and IF amplifier chain for diversity/MIMO receivers
• RF Frequency Range: 1400 MHz to 2700 MHz RF operating range
• LO Frequency Range / Drive: 1350 MHz to 2900 MHz LO operating range
• IF Frequency Range: 25 MHz to 400 MHz IF range
• Conversion Gain / Loss: 8.2 dB mixer power gain; 16.5 dB RF front-end power gain
• Linearity / P1dB: +35 dBm mixer OIP3; +38 dBm to +40 dBm front-end OIP3 depending on bypass mode
• Noise Figure / Isolation: 3.5 dB front-end noise figure at 2100 MHz class
• Supply / Bias: single 5 V supply; about 365 mA ICC class
• Package / Case: 48-pin 7 mm x 7 mm VFQFPN package
• Operating Temperature: -40°C to +85°C operating temperature class
• Design Notes: Match LO drive level, RF/LO/IF port orientation, grounding, exposed-pad or waveguide mounting, and external matching network to the exact suffix before approval.

Applications

Wireless infrastructure, cellular base stations, microwave radios, satellite communication equipment, CATV receivers, LNB modules, test instruments and broadband receiver or transmitter conversion paths.

Repair, prototype and shortage-support builds where original mixer suffix, package footprint, connector style and frequency plan must remain compatible with the existing RF design.

Quality & Sourcing

Antrex Electronics can support sourcing for F1180NBGI8 through available stock checks, BOM consolidation and alternative-lot review. For RF mixer components, date code, MSL handling, original label condition and package integrity should be reviewed before shipment.

For production recovery, repair support or shortage coverage, Antrex Electronics can coordinate visual inspection, package verification and third-party testing when required. This helps buyers manage risk when sourcing discontinued, legacy or hard-to-find RF mixer parts.