HX50-P/SP2
The HX50-P/SP2 is a 50A open-loop Hall effect current transducer from LEM, designed for isolated AC/DC current measurement in industrial drives, power supplies, and renewable energy systems
- ПРОИЗВОДИТЕЛЬ
- LEM USA Inc.
- КАТЕГОРИЯ ТОВАРА
- Датчики тока
- Корпус
- DIP
- Склад
- 1,500 шт.
- Наличие
- Текущее количество требует подтверждения.
Характеристики товара
| ПРОИЗВОДИТЕЛЬ | LEM USA Inc. |
|---|---|
| КАТЕГОРИЯ ТОВАРА | Датчики тока |
| Accuracy | ±1% |
| Applications | Motor Drives, UPS Systems, SMPS, Battery Systems, Renewable Energy Equipment |
| Frequency Bandwidth | 50 kHz |
| Insulation Material | UL94-V0 Rated Plastic Housing |
| Isolation Voltage | 3000 V |
| Linearity Error | ≤ ±1% |
| Load Resistance | ≥2 kΩ |
| Measurement Type | AC / DC / Pulsed Current |
| Mounting Type | PCB Mount |
| Nominal Primary Current (IPN) | 50 A RMS |
| Operating Temperature Range | -25°C to +85°C |
| Output Signal | 2.5 V ± 0.625 V at ±IPN |
| Output Type | Analog Voltage Output |
| Package Type | Through-Hole Module |
| Primary Current Measuring Range (IPM) | ±150 A |
| Product Type | Hall Effect Current Transducer |
| Response Time | ≤3 µs |
| Supply Type | Single Unipolar Supply |
| Supply Voltage | +12 V to +15 V DC |
| Technology | Open loop Hall effect |
| Техническая документация | Запросить даташит |
Сводка по закупке
Основная информация о поставке и закупке для HX50-P/SP2.
Почему выбирают Antrex Electronics?
Независимая дистрибьюторская поддержка для проверенных закупок, инспекции и международных требований к поставкам.
Поддержка независимого дистрибьютора
Поиск дефицитных, снятых с производства и труднодоступных компонентов для производственных и закупочных задач.
Проверка прослеживаемости
До подтверждения заказа можно проверить этикетку, партию, дату производства и доступную документацию по цепочке поставок.
Инспекция и тестирование
При необходимости можно организовать визуальную проверку, рентген и тестирование третьей стороной.
Глобальная поддержка закупок
Поддержка международных закупок для OEM, EMS и дистрибьюторов — от отдельных компонентов до BOM-проектов.
Сертификация и поддержка проверки
Контроль качества, проверка прослеживаемости и инспекционная поддержка для закупок электронных компонентов.
Подробное описание HX50-P/SP2
Product Overview
HX50-P/SP2 is an open-loop Hall effect current transducer manufactured by LEM. The device is designed for electronic measurement of DC, AC and pulsed currents with galvanic isolation between the high-power primary circuit and the secondary electronic circuit. Featuring a 50A RMS nominal current rating, 150A measuring range, compact PCB mounting design and analog voltage output, HX50-P/SP2 is widely used in industrial drives, power supplies, renewable energy systems, UPS equipment and motor control applications.
Key Features
Manufacturer: LEM
Part Number: HX50-P/SP2
Device Type: Hall Effect Open-Loop Current Transducer
Product Category: Current Sensor / Electrical Measurement Component
Measurement Principle: Open-Loop Hall Effect Technology
Primary Nominal Current: 50A RMS
Measuring Range: ±150A
Measurement Capability: DC, AC and Pulsed Current
Output Type: Analog Voltage Output
Output Signal: 2.5V ±0.625V at ±IPN
Supply Voltage: +12V to +15V Single Supply
Supply Current: Less Than 15mA
Accuracy: ±1% of IPN
Linearity Error: ≤±1% of IPN
Galvanic Isolation Voltage: 3000V
Response Time: ≤3μs
Frequency Bandwidth: 50kHz
Operating Temperature Range: -25°C to +85°C
Housing Material: UL94-V0 Recognized Insulating Plastic
Mounting Type: PCB Through-Hole Mount
Package Type: Compact Current Sensor Module
Weight: Approximately 8g
Low Power Consumption Design
High Immunity Against External Interference
Low Insertion Loss Due to Contactless Current Measurement
Application Type: Industrial Current Monitoring
Typical Applications: Variable Speed Drives, Servo Drives, UPS Systems, SMPS, Battery Applications, DC Motor Drives and Renewable Energy Equipment
Product Status: Industrial / Maintenance Component
Ordering Note: Verify supply voltage, output configuration, mounting dimensions and current range before replacement use.
Applications
HX50-P/SP2 is designed for isolated current measurement in industrial power electronics systems. Typical applications include AC variable speed drives, servo motor controllers, static converters, battery-powered systems, UPS equipment, switching power supplies, welding systems and renewable energy converters.
Quality & Sourcing
Antrex Electronics can support HX50-P/SP2 sourcing with stock availability checks, RFQ quotation, manufacturer verification, package confirmation, date code review and shipment arrangement. For current sensor sourcing projects, buyers can provide quantity requirements, acceptable date codes, electrical specifications and application information for faster quotation support.
For quality control, Antrex Electronics can help arrange product photos, marking verification, visual inspection and third-party testing when required. OEMs, EMS providers, industrial equipment manufacturers, repair centers and electronic component buyers are welcome to send BOM lists or hard-to-find sensor component requests.
Datasheet
Другие варианты закупки
Продолжите поиск по производителю, категории продукции или требованиям к закупке.
