NCP335FCT2G

Product Overview

The NCP335FCT2G from onsemi is a general-purpose high-side power switch/driver with a single output and a 1:1 input-to-output ratio. It uses a P-channel output configuration, an On/Off interface, and non-inverting input behavior. The device supports load voltages from 1.2 V to 5.5 V and a maximum output current of 2 A. Integrated features include load discharge and slew-rate control. It is offered in a 4-WLCSP (0.96 x 0.96) surface-mount package and is specified for junction temperatures from -40°C to 125°C.

Key Features

• Single high-side output with a 1:1 input-to-output ratio and P-channel switching architecture.
• On/Off control interface with non-inverting input behavior.
• Load voltage range of 1.2 V to 5.5 V and maximum output current of 2 A.
• Integrated load discharge and slew-rate-controlled switching behavior.
• 4-WLCSP (0.96 x 0.96) surface-mount package for compact board layouts.
• Specified operating junction temperature range of -40°C to 125°C.

Applications

• Switching enabled loads in low-voltage electronic assemblies.
• Controlling power to peripherals or subsystems in battery-powered devices.
• Managing load current with controlled switching transitions.

Design & Procurement Notes

Designers should confirm that the load voltage remains within 1.2 V to 5.5 V and that the expected load current does not exceed 2 A. The high-side P-channel topology requires attention to control polarity and On/Off interface timing. The load discharge and slew-rate-controlled features should be considered when planning turn-off behavior and switching transitions. The 4-WLCSP package and junction temperature range should be considered during layout and thermal planning.