MAX2650EUS+
IC AMP CELL 0HZ-1GHZ SOT143-4
Quick Answer: MAX2650EUS+ is a Maxim low-noise amplifier / RF front-end amplifier from Analog Devices / Maxim Integrated.
- Manufacturer
- Maxim Integrated
- Product Category
- RF Amplifiers
- Package
- TO-253-4, TO-253AA
- Stock
- 773 pcs
- Availability
- Current quantity subject to confirmation.
Product Attributes
| Manufacturer | Maxim Integrated |
|---|---|
| Product Category | RF Amplifiers |
| Current - Supply | 18mA |
| Frequency | 0Hz ~ 1GHz |
| Gain | 21dB |
| Min Qty | 0 |
| Mounting Type | Surface Mount |
| Noise Figure | 3.9dB |
| P1dB | -1dBm |
| Package | Strip |
| Product status | Active |
| RF Type | Cellular, GPS, W-LAN, WLLG |
| Supplier Device Package | SOT-143-4 |
| Test Frequency | 900MHz |
| Voltage - Supply | 4.5V ~ 5.5V |
| Datasheet | View Datasheet PDF |
Procurement Snapshot
Key supply and purchasing information for MAX2650EUS+.
Why Source from Antrex Electronics?
Independent distribution support for verified sourcing, inspection and international procurement requirements.
Independent Distribution Support
Shortage, obsolete and hard-to-find component sourcing for production and procurement requirements.
Traceability Review
Label, lot, date code and available supply-chain documentation can be reviewed before order confirmation.
Inspection & Testing
Visual inspection, X-ray and third-party testing support can be arranged when required.
Global Procurement Support
Support for OEM, EMS, distributors and international sourcing requirements across individual parts and BOM projects.
Credentials & Verification Support
Quality controls, traceability review and inspection support for electronic component sourcing.
Detailed Description for MAX2650EUS+
Product Overview
MAX2650EUS+ is a Maxim low-noise amplifier / RF front-end amplifier from Analog Devices / Maxim Integrated. In an RF design it is normally used as a low-noise receiver front-end gain stage, so the useful sourcing checks are not only the ordering code but also the operating band, gain behavior, output level, package footprint and bias conditions.
For this model, the key application data to verify are: application-specific RF band such as GPS/GNSS, cellular or ISM; exact band follows the MAX26xx base; noise figure, gain and linearity are specified by the exact Maxim base part; and low-voltage RF IC bias, package suffix +T normally indicates tape-and-reel. Because RF amplifier parts are layout- and matching-sensitive, MAX2650EUS+ should be treated as an exact-BOM item unless the replacement has been validated with the same matching network, thermal design and control conditions.
Key Features
- Manufacturer: Analog Devices / Maxim Integrated
- Part Number: MAX2650EUS+
- Device Type: Maxim low-noise amplifier / RF front-end amplifier
- Signal-Chain Role: low-noise receiver front-end gain stage
- Frequency / Band: application-specific RF band such as GPS/GNSS, cellular or ISM; exact band follows the MAX26xx base
- Gain / NF / Linearity: noise figure, gain and linearity are specified by the exact Maxim base part
- Output Power / Compression: low-power LNA output level, not a high-power PA
- Supply / Bias: low-voltage RF IC bias, package suffix +T normally indicates tape-and-reel
- RF Interface: RF input/output plus enable/bias pins; many parts include matching elements
- Package / Mounting: surface-mount RF IC, MMIC, transistor or connectorized module depending on base number
- Design Note: verify S-parameters, matching network, thermal pad/flange and control pins before substituting this RF amplifier
Applications
- GNSS receiver front ends
- cellular/ISM RF modules
- portable wireless equipment
- legacy receiver board repair
Quality & Sourcing
Antrex Electronics can support sourcing for MAX2650EUS+ and related RF amplifier BOM lines, including exact part-number matching, lot-label review, packaging inspection and third-party testing support when the project requires additional verification.
Explore More Sourcing Options
Continue sourcing by manufacturer, product category or procurement requirement.
