UBX-M10050-KB- A0100
IC GPS GNSS LOW POWER 47WLCSP
제품 특성
| 제조사 | u-blox |
|---|---|
| 제품 카테고리 | RF 수신기 |
| Antenna Connector | Not Included |
| Applications | GPS/GNSS Receiver |
| Data Interface | I2C, SPI, UART, USB |
| Features | SPI digital interface, UART interface, USB Interface |
| Grade | Automotive |
| Min Qty | 0 |
| Modulation or Protocol | Beidou, Galileo, GLONASS, GNSS, GPS |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 85°C |
| Package | Tray |
| Product status | Active |
| Qualification | AEC-Q100 |
| Sensitivity | -167dBm |
| Supplier Device Package | 28-QFN (4x4) |
| Voltage - Supply | 1V ~ 1.8V |
| 데이터시트 | 데이터시트 PDF 보기 |
조달 개요
UBX-M10050-KB- A0100의 주요 공급 및 구매 정보입니다.
왜 Antrex Electronics인가요?
검증된 소싱, 검사 및 글로벌 조달 요구에 대해 독립 유통 지원을 제공합니다.
독립 유통 지원
생산 및 조달 요구에 맞춰 수급난, 단종 및 구하기 어려운 전자부품 소싱을 지원합니다.
추적성 검토
주문 확정 전에 라벨, Lot, Date Code 및 제공 가능한 공급망 문서를 검토할 수 있습니다.
검사 및 테스트
필요 시 외관 검사, X-ray 및 제3자 테스트 지원을 진행할 수 있습니다.
글로벌 조달 지원
OEM, EMS 및 유통업체의 국제 조달 요구를 지원하며 단일 부품부터 BOM 프로젝트까지 대응합니다.
인증 및 검증 지원
전자부품 조달을 위한 품질 관리, 추적성 검토 및 검사 지원을 제공합니다.
UBX-M10050-KB- A0100 상세 설명
Product Overview
UBX-M10050-KB- A0100 from u-blox is a GNSS receiver IC for embedded RF/GNSS receiver designs. This product detail focuses on receiver architecture, supported satellite or RF bands, host-interface requirements and sourcing relevance for engineering and procurement teams.
It is suitable for designs where the exact ordering suffix must be matched for module footprint, firmware option, antenna path, temperature grade and host protocol compatibility before purchase.
Key Features
- Manufacturer: u-blox
- Part Number: UBX-M10050-KB- A0100
- Device Type: GNSS receiver IC
- Receiver Architecture: u-blox M10 GNSS receiver chip family for embedded positioning modules and receiver boards
- GNSS / RF Bands: L1 GNSS reception including GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS depending on firmware configuration
- Constellation / Signal Support: Concurrent multi-GNSS receiver engine optimized for low-power positioning
- Receiver Sensitivity: M10 high-sensitivity class with about -148 dBm acquisition and -167 dBm tracking sensitivity at module-family level
- Data / Host Interface: Host interfaces and protocol output depend on the module or receiver-board implementation using the UBX-M10 IC
- Supply Voltage: Low-voltage M10 receiver IC supply domain; verify exact chip revision and reference design before purchase
- Package / Case: u-blox M10 receiver IC package; confirm suffix and package code from the original design BOM
- Operating Temperature: Industrial receiver IC temperature class depending on suffix and application qualification
- Design Notes: Verify chip revision, reference design, RF front-end, firmware licensing and exact UBX-M10 ordering code before substitution.
Applications
Embedded GNSS receiver modules, compact tracker boards, low-power positioning devices and custom navigation hardware.
Designs that source the receiver IC directly rather than a complete u-blox GNSS module.
Quality & Sourcing
Antrex Electronics can support sourcing for UBX-M10050-KB- A0100 through available stock checks, BOM consolidation and alternative-lot review. For RF receiver components, packaging condition, date code, MSL handling and original labeling should be checked before shipment.
For project builds, repair support or shortage coverage, Antrex Electronics can coordinate visual inspection, package verification and third-party testing when required. This helps buyers manage risk when sourcing discontinued, legacy or hard-to-find RF receiver parts.
더 많은 소싱 옵션 보기
제조사, 제품 카테고리 또는 조달 요구사항별로 계속 소싱할 수 있습니다.
