CAM-M8Q-0
RF RCVR GNSS/GPS 1.575GHZ MODULE
제품 특성
| 제조사 | u-blox |
|---|---|
| 제품 카테고리 | RF 수신기 |
| Antenna Connector | On-Board, Chip |
| Applications | General Purpose |
| Current - Receiving | 29mA |
| Data Interface | SPI, UART |
| Frequency | 1.575GHz |
| Min Qty | 1 |
| Modulation or Protocol | BeiDou, GLONASS, GNSS, GPS, QZSS |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 85°C |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Product status | Active |
| Sensitivity | -167dBm |
| Series | CAM-M8 |
| Supplier Device Package | Module |
| Voltage - Supply | 2.7V ~ 3.6V |
| 데이터시트 | 데이터시트 PDF 보기 |
조달 개요
CAM-M8Q-0의 주요 공급 및 구매 정보입니다.
왜 Antrex Electronics인가요?
검증된 소싱, 검사 및 글로벌 조달 요구에 대해 독립 유통 지원을 제공합니다.
독립 유통 지원
생산 및 조달 요구에 맞춰 수급난, 단종 및 구하기 어려운 전자부품 소싱을 지원합니다.
추적성 검토
주문 확정 전에 라벨, Lot, Date Code 및 제공 가능한 공급망 문서를 검토할 수 있습니다.
검사 및 테스트
필요 시 외관 검사, X-ray 및 제3자 테스트 지원을 진행할 수 있습니다.
글로벌 조달 지원
OEM, EMS 및 유통업체의 국제 조달 요구를 지원하며 단일 부품부터 BOM 프로젝트까지 대응합니다.
인증 및 검증 지원
전자부품 조달을 위한 품질 관리, 추적성 검토 및 검사 지원을 제공합니다.
CAM-M8Q-0 상세 설명
Product Overview
CAM-M8Q-0 from u-blox is a GNSS receiver antenna module. This product detail focuses on receiver architecture, supported radio bands, interface requirements and sourcing relevance for engineering and procurement teams.
It is suitable for designs where the exact ordering suffix must be matched for package, firmware option, temperature grade, tape-and-reel format and host interface compatibility before purchase.
Key Features
- Manufacturer: u-blox
- Part Number: CAM-M8Q-0
- Device Type: GNSS receiver antenna module
- Receiver Architecture: u-blox M8 GNSS engine integrated with antenna-module RF path in an ultra-compact CAM form factor
- GNSS Bands: L1 GNSS reception including GPS/Galileo and either BeiDou or GLONASS concurrently depending on configuration
- Sensitivity Class: High-sensitivity GNSS receiver antenna module designed for strong signal levels in compact products
- Navigation Engine: u-blox M8 concurrent positioning engine with fast acquisition and embedded navigation processing
- Supply Pins: Main supply, backup supply and I/O supply pins are used in the CAM-M8 hardware design
- Data Interface: UART, USB, SPI or DDC/I2C-class host interfaces depending on module option
- Package / Case: CAM-M8 antenna module form factor with embedded GNSS antenna path
- Design Notes: Confirm active/passive antenna assumptions, ground-plane layout and firmware generation before replacing CAM-M8C/CAM-M8Q modules.
Applications
Asset trackers, portable navigation devices, battery-powered location products and compact IoT equipment.
GNSS receiver designs that benefit from a module with integrated antenna path and u-blox M8 positioning engine.
Quality & Sourcing
Antrex Electronics can support sourcing for CAM-M8Q-0 through available stock checks, BOM consolidation and alternative-lot review. For RF receiver components, packaging condition, date code, MSL handling and original labeling should be checked before shipment.
For project builds, repair support or shortage coverage, Antrex Electronics can coordinate visual inspection, package verification and third-party testing when required. This helps buyers manage risk when sourcing discontinued, legacy or hard-to-find RF receiver parts.
더 많은 소싱 옵션 보기
제조사, 제품 카테고리 또는 조달 요구사항별로 계속 소싱할 수 있습니다.
