TES 5-4822

Product Overview

The Traco Power TES 5-4822 is an isolated module DC DC converter designed for board-mount power architectures that require symmetric dual-rail outputs from a 36V to 75V input. It provides +12V and -12V outputs, each rated for 210mA, within a 5W package. The converter includes 1.5kV input-to-output isolation, Remote On/Off control, and SCP, and is specified for ITE commercial applications. Its surface-mount 24-SMD module, 14-leads package measures 33.4mm x 20.6mm x 10.2mm, supporting compact board layouts where isolated auxiliary power is needed.

Key Features

• Isolated module DC DC converter with two outputs: +12V and -12V.
• Input voltage range: 36V to 75V.
• Output current: 210mA on each output, 5W total power.
• 1.5kV isolation between input and outputs.
• Remote On/Off and SCP features.
• Surface-mount 24-SMD module, 14-leads package.
• Operating temperature range: -40°C to 85°C with derating.
• Efficiency: 85%.
• Size: 33.4mm x 20.6mm x 10.2mm.

Applications

• Commercial information technology equipment requiring isolated +/-12V auxiliary rails.
• Embedded board-level subsystems needing symmetric dual-rail power from a 36V to 75V bus.
• Instrumentation or measurement circuits requiring input-to-output isolation and remote enable control.

Design & Procurement Notes

Designers should verify that the total load and individual output currents remain within the specified 210mA per output and 5W package rating when operating from a 36V to 75V input. Because the device is surface mount in a 24-SMD module, 14-leads package, layout and thermal paths should be planned around the 33.4mm x 20.6mm x 10.2mm footprint. The 1.5kV isolation rating supports input-output separation in commercial ITE systems, while Remote On/Off and SCP can be used for system control and protection. Thermal derating should be considered across the -40°C to 85°C operating range, especially in enclosed boards or higher ambient conditions.