HMC506LP4E

Product Overview

HMC506LP4E is a Hittite / Analog Devices microwave MMIC amplifier from Analog Devices. In an RF design it is normally used as a microwave gain, driver or power-amplifier stage, so the useful sourcing checks are not only the ordering code but also the operating band, gain behavior, output level, package footprint and bias conditions.

For this model, the key application data to verify are: GHz-band microwave coverage is exact-base specific; many HMC/ADPA parts are narrowband or broadband MMICs; gain, Psat/P1dB, OIP3 and NF must be matched to the exact HMC/ADPA base; and positive/negative gate or drain bias as specified by the MMIC family. Because RF amplifier parts are layout- and matching-sensitive, HMC506LP4E should be treated as an exact-BOM item unless the replacement has been validated with the same matching network, thermal design and control conditions.

Key Features

• Manufacturer: Analog Devices
• Part Number: HMC506LP4E
• Device Type: Hittite / Analog Devices microwave MMIC amplifier
• Signal-Chain Role: microwave gain, driver or power-amplifier stage
• Frequency / Band: GHz-band microwave coverage is exact-base specific; many HMC/ADPA parts are narrowband or broadband MMICs
• Gain / NF / Linearity: gain, Psat/P1dB, OIP3 and NF must be matched to the exact HMC/ADPA base
• Output Power / Compression: MMIC output power and thermal limit per ADI datasheet
• Supply / Bias: positive/negative gate or drain bias as specified by the MMIC family
• RF Interface: 50 Ω RF/microwave ports, sometimes die or ceramic SMT package
• Package / Mounting: surface-mount RF IC, MMIC, transistor or connectorized module depending on base number
• Design Note: verify S-parameters, matching network, thermal pad/flange and control pins before substituting this RF amplifier

Applications

• microwave radios
• radar and aerospace RF modules
• test instrumentation
• point-to-point links

Quality & Sourcing

Antrex Electronics can support sourcing for HMC506LP4E and related RF amplifier BOM lines, including exact part-number matching, lot-label review, packaging inspection and third-party testing support when the project requires additional verification.