ADRF5721BCCZN-R7
16 LEAD LGA
- 제품 카테고리
- RF 감쇠기
- 패키지
- 16-VFLGA Exposed Pad
- 재고
- 261 개
- 공급 가능 여부
- 현재 수량은 확인이 필요합니다.
제품 특성
| 제조사 | Analog Devices Inc. |
|---|---|
| 제품 카테고리 | RF 감쇠기 |
| Attenuation Value | 2dB ~ 30dB |
| Frequency Range | 9 kHz ~ 40 GHz |
| Impedance | 50 Ohms |
| Min Qty | 1 |
| Package | Tape & Reel (TR),Cut Tape (CT),Digi-Reel® |
| Product status | Active |
| 데이터시트 | 데이터시트 PDF 보기 |
조달 개요
ADRF5721BCCZN-R7의 주요 공급 및 구매 정보입니다.
왜 Antrex Electronics인가요?
검증된 소싱, 검사 및 글로벌 조달 요구에 대해 독립 유통 지원을 제공합니다.
독립 유통 지원
생산 및 조달 요구에 맞춰 수급난, 단종 및 구하기 어려운 전자부품 소싱을 지원합니다.
추적성 검토
주문 확정 전에 라벨, Lot, Date Code 및 제공 가능한 공급망 문서를 검토할 수 있습니다.
검사 및 테스트
필요 시 외관 검사, X-ray 및 제3자 테스트 지원을 진행할 수 있습니다.
글로벌 조달 지원
OEM, EMS 및 유통업체의 국제 조달 요구를 지원하며 단일 부품부터 BOM 프로젝트까지 대응합니다.
인증 및 검증 지원
전자부품 조달을 위한 품질 관리, 추적성 검토 및 검사 지원을 제공합니다.
ADRF5721BCCZN-R7 상세 설명
Product Overview
The ADRF5721BCCZN-R7 from Analog Devices is a 4-bit silicon digital attenuator designed for controlled signal reduction in 50-ohm RF paths. It provides 30 dB across a documented 9 kHz to 40 GHz operating range with a 26 dBm average, 30 dBm peak power rating. The device is documented for applications including Test and instrumentation, 5G millimeter-wave infrastructure, Microwave radios and VSAT systems.
Key Features
- Attenuator Type: 4-bit silicon digital attenuator
- Frequency Range: 9 kHz to 40 GHz
- Attenuation Range: 30 dB
- Step Size: 2 dB
- Insertion Loss: 3.4 dB maximum up to 40 GHz
- Input IP3: 50 dBm typical
- Supply Voltage: +3.3 V and -3.3 V dual supply
- Control Interface: SPI and parallel control, CMOS/LVTTL compatible
- Impedance: 50 ohms
- Power Rating: 26 dBm average, 30 dBm peak
- Package: 16-terminal 2.5 mm × 2.5 mm LGA
- Operating Temperature: -40°C to +105°C
- Settling Time: 8.5 µs
Applications
- Test and instrumentation
- 5G millimeter-wave infrastructure
- Microwave radios and VSAT systems
- Radar and electronic countermeasure systems
Quality and Sourcing
Antrex Electronics supports sourcing for this part number and related electronic components. Available material can be reviewed for manufacturer, date code, packaging condition and traceability before quotation. Third-party inspection or additional testing can be arranged when required.
더 많은 소싱 옵션 보기
제조사, 제품 카테고리 또는 조달 요구사항별로 계속 소싱할 수 있습니다.