TEN 30-2423

Product Overview

The Traco Power TEN 30-2423 is an isolated module DC-DC converter for board-mount power conversion in commercial information technology equipment. It accepts 18 V to 36 V input and provides +15 V and -15 V outputs, each rated for 1 A. The 6-DIP through-hole module measures 50.8 mm x 25.4 mm x 10.2 mm. It has a 30 W power rating, 1.5 kV input-to-output isolation, remote on/off control, and overcurrent, overtemperature, overvoltage, short-circuit, and undervoltage lockout protection. Efficiency is 90%, and operation is rated from -40°C to 85°C with derating.

Key Features

• Isolated dual-output converter with +15 V and -15 V outputs, each rated for 1 A.
• Input range 18 V to 36 V with 30 W power rating.
• 1.5 kV input-to-output isolation.
• Remote on/off control plus overcurrent, overtemperature, overvoltage, short-circuit, and undervoltage lockout protection.
• 90% efficiency; -40°C to 85°C operating range with derating.
• Through-hole 6-DIP module, 50.8 mm x 25.4 mm x 10.2 mm.

Applications

• Commercial information technology equipment requiring isolated positive and negative supply rails.
• Board-level power distribution in commercial devices with 18 V to 36 V inputs.
• Analog or mixed-signal circuitry needing +15 V and -15 V domains.

Design & Procurement Notes

For design, verify that the input remains within 18 V to 36 V and that total load does not exceed the 30 W rating. The +15 V and -15 V outputs are each rated for 1 A, so simultaneous loads should be checked against the overall power budget. Account for derating within the -40°C to 85°C operating range and losses from 90% efficiency. Use remote on/off to enable or disable the converter from system control logic. The 1.5 kV isolation supports separated input and output ground domains. For procurement, specify the exact Traco Power TEN 30-2423 and confirm the 6-DIP through-hole module footprint and 50.8 mm x 25.4 mm x 10.2 mm height fit the assembly.