UPG2185T6R-E2-A
IC SW SPDT 2GHZ-6GHZ 6-TSSON
製品属性
| メーカー | CEL |
|---|---|
| 製品カテゴリ | RFスイッチ |
| Circuit | SPDT |
| IIP3 | 50dBm (typ) |
| Impedance | 50Ohm |
| Min Qty | 0 |
| Operating Temperature | -40°C ~ 90°C |
| P1dB | 30.5dBm (typ) IP1dB |
| Package | Cut Tape (CT) |
| Product status | Obsolete |
| RF Type | 802.11a/b/g/n |
| Supplier Device Package | 6-TSSON |
| Topology | Reflective |
| データシート | データシート PDF を表示 |
調達概要
UPG2185T6R-E2-A の主要な供給・購買情報です。
Antrex Electronicsを選ぶ理由
確認済みの調達、検査、国際調達要件に対して独立系ディストリビューションのサポートを提供します。
独立系ディストリビューションサポート
生産および調達要件に対応し、供給不足品、製造中止品、入手困難な電子部品の調達を支援します。
トレーサビリティ確認
注文確定前に、ラベル、ロット、デートコード、および利用可能なサプライチェーン書類を確認できます。
検査・試験
必要に応じて、外観検査、X線検査、第三者試験のサポートを手配できます。
グローバル調達サポート
OEM、EMS、ディストリビューターの国際調達要件に対応し、単品部品からBOM案件までサポートします。
認証・検証サポート
電子部品調達向けに品質管理、トレーサビリティ確認、検査サポートを提供します。
UPG2185T6R-E2-A の詳細説明
Product Overview
UPG2185T6R-E2-A is a single-pole double-throw (SPDT) RF switch IC from CEL, designed for controlled RF path selection in wireless front ends, microwave signal chains, communication modules and RF test circuitry. It provides one common RF port switched between two RF paths and operation up to 2 GHz, helping designers replace mechanical switching with a compact semiconductor RF switching solution.
For practical design review, this part should be evaluated together with the antenna network, filters, LNA, PA, receiver, transmitter and control logic. The package listed for this orderable code is 6-XFDFN Exposed Pad, so engineers should compare the land pattern, RF-port orientation, control truth table and assembly requirements with the latest manufacturer datasheet before production approval.
Key Features
- Manufacturer: CEL
- Part Number: UPG2185T6R-E2-A
- Device Type: single-pole double-throw (SPDT) RF switch IC
- Switch Configuration: single-pole double-throw (SPDT)
- RF Frequency Range: up to 2 GHz
- RF Path Function: one common RF port switched between two RF paths
- Technology / Construction: RF semiconductor switch IC for compact wireless front-end signal routing
- System Impedance: 50 Ω RF signal-path design reference where supported by the datasheet
- Package / Case: 6-XFDFN Exposed Pad
- Assembly Consideration: Surface-mount package for compact RF PCB layouts
- Use Case: antenna switching, transmit/receive routing or RF signal-chain path selection
- Design Notes: Verify insertion loss, isolation, return loss, switching speed, RF power handling, bias/control limits and pinout against the official datasheet before final approval.
Applications
UPG2185T6R-E2-A can be used in antenna switching, transmit/receive path selection, diversity switching, filter selection and compact RF signal-chain routing. It is suited to RF front-end designs where signal paths need to be selected electronically while keeping board size, repeatability and switching control under the system controller.
In replacement, repair or BOM-continuation work, buyers should compare the exact topology, frequency range, package footprint, RF-port arrangement and control logic with the original board. Any substitution should also consider loss, isolation, return loss, switching speed, linearity and RF input power limits in the end equipment.
Quality & Sourcing
Antrex Electronics can support UPG2185T6R-E2-A sourcing with stock availability checks, RFQ quotation, date code review, package confirmation and shipment arrangement. For RF switch purchasing, buyers can provide target quantity, acceptable date code, package requirement, application frequency range and inspection requirements for faster quotation support.
For quality control, Antrex Electronics can help arrange product photos, label review, visual inspection and third-party testing support when required. OEMs, EMS providers, RF module manufacturers, communication-equipment builders, repair teams and electronic component buyers are welcome to send BOM lists or hard-to-find RF switch requests for sourcing assistance.
その他の調達オプションを見る
メーカー、製品カテゴリ、または調達要件から引き続き部品をお探しいただけます。
